Home Story Photos Blogs Sounds Timing Graphs
I had to dig up a few old hardrives to find some of this stuff.
So I will go back as far as I can.
5 . The current timing note my engine does not go to 10000 rpm, Itís a lot easier to keep track of the timing because its linear with rpm.
8. This was after the valve mods.
† I removed a plug of silicon from an oil way to the cam, I did some more modification to the valves because in 2005 I found if you pitted the surface the flow was slightly better.
9. looks like number 6 but the bottom end is lower
10. This was after tuning in jan 2006